The cost-effective alternative
The PowerCUTTER 150 has inherited many of the technical genes of its big brother, the PowerCUTTER 200, and can be operated with the same control unit/hose package. It impresses with a slim design with three degrees of freedom and a functional design without supply lines on the robot.
Air motor and Twin camera
The extraordinarily powerful ECO-Line motor is equipped with an M14 connection thread.
- Power: 0,86 kW / 1,2 hp
- Rpm: 18.000 1/min
- Torque: 4 Nm / 2,95 lbs ft
- Air consumption: 1,050 l/min / 35 cfm
- Double camera integrated in one housing
- High-resolution CCD color camera to observe the milling process
- High-resolution CCD color camera in a radial viewing direction
- Luminous LED lighting
- Both cameras can be cleaned using a water nozzle
Cable drum and hose reels for PowerCUTTER 150 and 200
Cable drum PC 150/200
- 140 m / 220 m special cable; elastic limit over 400 kg
- Automatic winding and unwinding
- Forced guidance of the cable during winding and unwinding
- Integrated distance display
- Manual reeling of the cable possible
Manual hose reel
- 100 m / 200 m TWIN hose for air and water supply
- Stable steel construction
- Manual winding and unwinding of the special hose
- Built-in air lubricator with solenoid valve
Motoric hose reel
- 100 m / 200 m TWIN hose for air and water supply
- Reeling by means of an airmotor
- Integrated air lubricator for the drive engine
- Solid steel frame
- Protection all around against violation
- Weight approx. 165 kg incl. 200 m TWIN hose
Milling tools
Diamond milling heads
Field of application: mineral materials such as concrete and stoneware. Can also be used for processing of cast materials to a limited extent.
Epulo milling heads
Field of application: all non-mineral materials such as liner material, roots and plastics.
ATTENTION: The milling heads of the Epulo series may not be used for machining steel or for cast-iron materials!